SJE/Rhombus Controls
Back..
|
|
|
|
SJE/Rhombus Controls Back.. |
| Wide Angle PUMP SWITCHES | APPLICATION | HORSE POWER RATINGS | START-UP/RUNNING AMPS | PUMPING RANGE |
|
Junior Super Single® pump switch
(mercury activated) |
Provides automatic pump operation in sump, Sewage, and water applications. Not sensitive to rotation.
|
1/2 HP at 120V 1 HP at 230V |
40(120V)/13 20(23OV)/13 |
5.5 to 17 inches |
|
Super Single® pump switch
(mercury activated) |
Provides automatic pump operation for sump and sewage pumps, solenoids, and relays. Not sensitive to rotation or turbulence.
|
1 HP at 120V 2 HP at 230V |
55(120V)/15 35(23OV)/15 |
6.5 to 13.5 inches |
|
Double Float™ pump switch
(mercury activated) |
1 HP at 120V 2 HP at 230V |
55(120V)/15 35(23OV)/15 |
1 to 48 inches Wider Ranges Available |
|
|
SJE PumpMaster® pump switch
(mechanically activated) |
Provides automatic pump operation in water and sewage applications. Not sensitive to rotation or turbulence.
|
1/2 HP at 120V 1 HP at 230V |
85(120V)/13 85(23OV)/13 |
7 to 36 inches |
|
SJE PumpMaster® Plus pump switch
(mechanically activated) |
3/4 HP at 120V 2 HP at 230V |
85(120v)/15 85(230v)/15 |
7 to 36 inches | |
|
SJE PumpMaster®SPDT pump switch
(mechanically activated) |
Can be wired to provide automatic pump up or pump down operation in water and sewage applications.
|
1/2 HP at 120V 1 HP at 230V |
85(120V)/13 85(23OV)/13 |
7 to 36 inches |
|
SJE AmpMaster™ pump switch
(mechanically activated) |
Provides automatic control of grinder and high head sewage pumps.
|
1.5 HP at 125V 3 HP at 250V |
120(125V)/20 120(25OV)/20 |
5 to 22 inches |
|
SJE VerticalMaster® pump switch
(mechanically activated) |
Provides automatic pump operation in confined areas. For water and sump applications.
|
1/2 HP at 120V 1 HP at 230V |
60(120V)/13 60(23OV)/13 |
.75 to 6.5 inches |
| Liquid Level ALARM SYSTEMS | APPLICATION | ENCLOSURE | VOLTAGE | OPTIONS |
|
Tank Alert® I alarm system
|
Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks, and water systems.
|
NEMA 1 (indoor) |
120V 50/60 Hz or 230V 50/60 Hz 6.5 watt (alarm condition) |
Alarm Auxiliary Contacts, Surge Protection |
|
Tank Alert® II alarm system
Includes Alarm Auxiliary Contacts & Alarm Auto Reset |
NEMA 4X (outdoor/indoor) |
120V 50/60 Hz or 230V 50/60 Hz 40 watts max (alarm condition) |
Surge Protection, Flasher Pre-alarm Flasher, Amber Beacon | |
|
Tank Alert® XT indoor/outdoor alarm
Includes Alarm Auto Reset |
Entire system UL Listed for outdoor/ indoor use under UL Standard 864 meets
|
NEMA 3R water-tight requirements | 120V 50/60 Hz 7 watts max (alarm condition) |
Alarm Auxiliary Contacts, Terminal Block, 6' Power Cord |
| Narrow Angle CONTROL SWITCHES | APPLICATION | CONTROL DIFFERENTIAL |
ELECTRICAL RATINGS | MOUNTING OPTIONS |
|
Sensor Float® control switch
(mercury activated) |
Activates alarms, control panels, solenoids, and relays.
|
Approximately .5 inch above or below horizontal | 13 Amp 120V or 230V |
|
|
Sensor Float® Mini control switch
(mercury activated) |
Activates alarms, control panels, solenoids, and relays.
|
Approximately .5 inch above or below horizontal | 13 Amp 120V or 230V |
|
|
SJE SignalMaster™ control switch
(mechanically activated) |
Activates alarms, control panels, solenoids, and relays. SPDT version can be wired to work in either high or low level applications.
|
Approximately 1.5 inches above or below horizontal | 5 Amp 125V or 250V |
|
|
SJE SignalMaster™ SPDT control switch
(mechanically activated) |
Approximately 1.5 inches above or below horizontal | 5 Amp 125V or 250V |
|