Managers of Commercial/Industrial facilities have responsibilities for countless issues during their normal daily routine, one of which is the proper operation of their onsite wastewater treatment system. This usually is not a high priority, thus leading to costly problems from system failures or fines for exceeding discharge standards.

The SmartFilter is designed to provide the manager of a Commercial/industrial facility an early warning that their septic tank or grease interceptor needs a service call. The vertical float switch monitors the blockage of the filter and sends a signal to the alarm panel when the filter is approximately 90% full or "mature".

The alarm sounds and the red beacon illuminates, prompting the manager to contact their service company.

1. Clean the switch and filter. To avoid potential health hazards, the filtered debris must be sprayed directly back into the septic tank or grease interceptor.
2. Determine if pumping the tank is necessary by checking the depth of sludge or grease in the tank.
3. Pump the tank, if necessary

• Alarm panel features manual alarm test switch and horn silence switch
• Alarm horn sounds at 82 decibels at 10 feet (3 meters)
• Direct interface of control switch and Zabel A100/A100 HIP and A300/A300 HIP effluent filters insures proper placement of switch.
• Two-year limited warranty